Are you in Canberra and looking for plumbing experts you can rely on? Fluid Plumbing & Gas Services can help!
We Handle All Types of Plumbing Services To Homes & Businesses
We provide all types of plumbing services, to meet any domestic, commercial, industrial or rural need. Whether it’s a burst pipe you want rectified or your hot water system replaced, we’re here to help.
How much does a plumbing service cost?
Plumbing service cost varies and is related to the nature of work. The service fee is between $50 to $150 and an hourly rate of $100 to $175 for labour only. This only serves as a guide in Canberra, and prices should be asked directly to your provider.
|Plumbing Service||Cost ($)|
|Installation of solar hot water||12 000|
|Replacing hot water service||1 200|
|Installation of toilet||550|
|Installation of basin taps or new shower head||250|
|Fixing tap or leaking toilet ||60 to 140|
The following are the factors that affect the cost of plumbing service:
#1. Kind of task. The type of problem that you need to address influences the cost of plumbing service. It would be cheaper to have some repair than if you were to undergo a new installation.
#2. Degree of the problem. The level of difficulty is another factor that affects the cost. Plumbing services have an hourly rate. However, some plumbing jobs that are on a fixed price basis, such as repairing a leaky pipe ($180), unclogging a drain or a toilet ($120 to 150), or replacing a broken tap ($120).
#3. Materials used. The materials needed for the installation or repair for plumbing problems also affect the price.
#4. Urgency. The urgency of the task involves the cost of plumbing service. If you need plumbing services in the middle of the night, holidays, or weekends, expect to pay a higher fee. An emergency call-out fee of $150 to $250 will be paid. On top of that, you also have to pay a higher hourly rate.
Our professional and qualified plumbers can assist you with:
All plumbing & drainage
Emergency call outs available
Storm water services
Extensions & renovations
Leaking taps & toilets
Blocked toilets & pipes
Roof repairs & installation
CCTV drain inspections
Thermostatic mixing valves
Rain water tank installations
Pre purchase plumbing inspections
If you’re looking for plumbing specialist near you in Canberra, give us a call on 📞 0411 169 327.
How long does it take to install plumbing in Canberra?
The average time to install plumbing in home constructions requires three to five days. Here are the factors that affect the length of time to install plumbing in Canberra:
#1. Size of project. It will require more time for plumbing installation for larger construction projects such as multi-family apartments or larger single-family homes with multiple bathrooms.
#2. Weather. Any construction project will be delayed when there are windstorms and rain.
#3. Scheduling conflicts. Installing plumbing does not only involve plumbers. Other crew members that work on the construction of a building, such as electricians. If plumbers experience delays in the laying of the foundation, this will also affect their timeline.
How does the plumbing system work?
The plumbing system comprises two subsystems. The first brings fresh water in, while the other one takes the wastewater out. Water supply pipes get fresh water from the well or the utility and are distributed to bathtubs, sinks, washers, toilets, and related fixtures. The drainage system carries away waste and used water to septic tanks or sewers.
FREQUENTLY ASKED QUESTIONS ABOUT THE PLUMBING SERVICE IN CANBERRA
How do you install plumbing in a new house?
Here are the steps when installing plumbing in a new house:
#1. Rough-in phase. The rough-in phase involves laying the primary lines without making the final connections. This is done when the framing is done, but before hanging the drywall. Next, installation of main drains is done, and these are connected to the vertical drain pipe, called the stack, that other drain pipes feed into. The sinks and bathtubs’ rough-in drain fittings are also installed, and the toilet flanges and water supply pipes.
#2. Setting and connecting plumbing fixtures. Showers and bathtubs are too large to set once the framing of walls and doorways is complete. Thus, these are set before the framing of walls. All fixtures are set and connected to the supply and drainage systems.
#3. Installing the water supply system. The mainline serves as a passageway of the pressurized water supply. Therefore, the line must be set below the frost line, the depth where the freezing of groundwater occurs, to prevent the line’s freezing and damage the pipes.
#4. Installing the drainage system. This involves installing the central vent and soil stack, and the waste drains that connect to it.
Why is cast iron plumbing bad?
Cast iron pipes are durable, but these are prone to corrosion and can develop rust, slowing water drainage. Cast iron is not dangerous. However, joints and connections contain lead, which can affect health when consumed. It is not a big concern since these pipes are not meant for drinking water. However, only qualified plumbers should perform repairs.
How long does PVC plumbing last?
PVC or polyvinyl chloride piping lasts from 25 to 40 years. Technological advancements, however, can extend its longevity for up to 70 years or more. PVC is resistant to shock, chemical rotting, weathering, corrosion, and abrasion.
Should I replace copper pipes?
You do not need to replace copper pipes that are in excellent condition. However, if the pipes show damage or deterioration, or if you have acidic water, then you should replace copper piping. Leaching happens when highly acidic water comes into contact with water and deposits a blue-green scale on tubs, sinks, or other plumbing fixtures. This does not only affect metal finishes; it also produces a bitter metallic taste.